With the right care, your inversion table should require very little maintenance. However, there are several things you should do to make sure your table stays in excellent condition and is safe to use.

Follow these inversion table maintenance tips to keep your table in good working order:

Regular maintenance will prolong the life of your inversion table.

1. Tighten all nuts, bolts, and other fasteners before the first use and on a regular basis thereafter, such as every three months.
2. Check all moving parts to make sure they move freely with no obstructions.
3. Lubricate all moving parts with a clear aerosol, silicone or Teflon spray. Do not use oil-based lubricants, as these will attract dust, dirt, and grime and will eventually erode the joints and moving parts. Regular lubrication, such as every few months, will keep your inversion table in excellent working condition.
4. Check all parts, including the frame, bed, and other parts, for wear and damage. Check all welds for signs of cracks. If you spot any damage, stop using the inversion table immediately. Do not resume using your inversion table until it has been repaired by a qualified technician.
5. Clean the inversion table bed as often as needed. Wipe down the upholstery with a mild solution of soap and water. Regular cleaning will prolong the life of the upholstery.
6. Clean all chrome surfaces regularly to maintain the sheen of your inversion table frame. Use a commercial grade or automotive chrome polish.
7. Keep your inversion table out of direct sunlight. Prolonged exposure to sunlight may fade the vinyl and crack the upholstery.
8. Keep your inversion table away from walls and other objects. Leave enough room around the inversion table to rotate freely.